I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed.ĭoes someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. Physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) Physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) Physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) Physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) Physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) Physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) Physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) Physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) ~# /usr/sbin/hpacucli ctrl slot=0 show config This is how it looked when I detected the error: 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. ![]() I have a HP Server with SmartArray P400 controller (incl.
0 Comments
Leave a Reply. |